DSi eLogs

Electronic Logging DeviceWynne Systems DSi eLogs
Model NumberDSi eLogs-001 or higher
Software Versionv4.6.0 or higher

Model Information

Data Transfer MethodsOur product supports wireless transfer through web services, wireless services via email and USB2 1. DOT officer selects Export Logs from Inspection Mode screen 2. Transfer screen inputs: a. DOT officer selects Transfer method (email or USB) b. DOT officer selects PDF or CSV file c. DOT officer enters Output File Comment d. DOT officer selects OK 3. File is transfered
Malfunction NotesPower Compliance – Create a Power Compliance data diagnostic event if ELD does not meet Engine Power, Vehicle Motion, Vehicle Miles or Vehicle Engine Hours requirements. Create a Power Compliance malfunction when the aggregated in-motion driving time is understated by 30 minutes or more during a 24-hour period across all driver profiles, including the unidentified driver profile Engine Sync – Create an Engine Sync data diagnostic event when the ELD loses connection to the vehicle’s ECM. Create an Engine Sync malfunction when the connection to the ECM is lost for more than 30 minutes during a 24-hour period Timing Compliance – Create a Timing Compliance malfunction event when UTC time cannot be obtained Positioning Compliance – Monitors the elapsed time and distance between the last valid measurement point. Monitor the duration when a valid position measurement is not acquired within the most recent 5 miles of driving. Create a Positioning Compliance malfunction event when the elapsed time exceeds a cumulative 60 minutes over a 24-period since the last valid position measurement. Data Recording Compliance – Create a Data Recording Compliance malfunction when our app can no longer record or retain required events or retrieve recorded logs that do not reside on the motor carrier’s server. A Missing Required Data Elements data diagnostic event will be created when required data elements are missing from an ELD event. Unidentified Driver Profile – If unidentified driver mile records exist on an ELD, a new driver logging into the device will be prompted with a warning indicating the existence of new unidentified driver records. Create an Unidentified Driving Records data diagnostic event if more than 30 minutes of unidentified driving within a 24-hour period has occurred. Clear the Unidentified Driving Records data diagnostic event when the cumulative unidentified drive time drops below 15 minutes for the current 24 hour period + previous 7 days. Data Transfer Compliance – Monitor our data transfer mechanism. Create a Data Transfer Compliance data diagnostic event when data transfer mechanism does not function properly. Increase monitoring frequency to once every 24 hours. If the next 3 consecutive monitoring checks stay in unconfirmed data transfer mode then create a Data Transfer Compliance malfunction Other Technology – Visual indicators are used to inform the driver if the ELD is connected to the ECM and whether a malfunction or data diagnostic event has occurred.
Certifying StatementWe certify that we have tested this product and fulfilled the requirements as outlined in the Electronic Logging Device (ELD) Test Plan and Procedures which is published on the FMCSA website - FMCSA.dot.gov

Company Information

ManufacturerWynne Systems
Contact Email[email protected]
Contact Phone Number949-224-6300
Address2601 Main St, #270, Irvine, CA 92614

Devices From Wynne Systems

Device ID
Wynne Systems DSi eLogs DSIELD

Related ELDs

This site's data is aggregated programmatically and provided "as is" without any representations or warranties, express or implied. Transportation.report is not affiliated with the DOT, the NHTSA, or the US government in any way.

© 2022 Transportation.Report | Definitions